Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1
Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1
Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1
Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1
Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1
Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1
Shape cutting out of thick panels
We offer plasma and oxy-fuel (autogenous) cutting for cutting shapes out of thick plates. Plasma cutting is faster and suitable for thicknesses up to 30 mm, while oxy-fuel cutting is used for thicker plates and specific materials.
Plasma Plate Cutting: We cut all electrically conductive materials that cannot be cut with oxy-fuel technology. We use hot-rolled and cold-rolled plates made of structural and alloy steels.
- Cutting dimensions: 2.500 × 18.000 mm
- Thickness: 3–40 (50) mm
- Cutting tolerances: EN 9013 Class 1
Oxy-Fuel Plate Cutting: Is suitable for steel, iron, aluminum, and other metallic materials thicker than 1 mm.
- Cutting dimensions: 2.500 × 12.000 mm
- Thickness: 8 – 200 mm
- Cut tolerance: EN 9013 class 1